Motion Control Suspension

Apex Competition is an authorized Motion Control Suspension agent.
As a development partner, ACS along with Bildon Motorsport, define the specifications, carry out the development, and then validate our MCS Volkswagen race damper packages through rigorous track testing.

The complete MCS range is available for VW, from 1 through 4-way systems.

ACS understands how to apply road race systems for SCCA, GLTC, NASA, and more. If you’re serious about results, let ACS put our experience to work for you.

How to Order

If you already have experience with fully adjustable race suspensions,
you can select and purchase from the links below on this page.

However, if you would like to know more about which suspension may be best for you... then this is where ACS becomes your partner in achieving the goals for your team. We are not just here to sell you a suspension. We are here to bring the club racer the correct balance of knowledge, performance and value.

Click the learn more button below and look over the documentation and technical guides we've put together. With MCS from ACS, you can take your rightful place at the front of the pack.

Learn more

MCS 1WNR

A single-adjustable non-remote damper. Our heavy hitting entry level system.

Monotube Design
18 clicks of rebound adjustment
22mm strut shafts
16mm shock shafts

ORDER MCS 1W NR

MCS 2WNR

A double-adjustable damper with a unique adjustment mechanism for easy access and fast changes. Compression and rebound damping are adjusted independently from the shaft-side of the damper.

Monotube Design
14 clicks of high speed compression adjustment
18 clicks of rebound adjustment
22mm strut shafts
16mm shock shafts

Order MCS 2W NR

MCS 2W

A double-adjustable damper with a remote reservoir increasing compression blowoff capacity and adjustable gas pressure. Effective stroke is increased and valving options are increased.

Monotube Design
18 clicks of high speed compression adjustment
18 clicks of rebound adjustment
22mm strut and shock shafts
Adjustable reservoir nitrogen pressure

ORDER MCS 2W

MCS 3W

Sharing components with the 2W system, the 3W system introduces low speed compression bleed allowing the user to manipulate pitch & roll more effectively with fewer compromises.

Monotube Design
18 clicks of high speed compression adjustment
10 clicks of low speed compression adjustment
18 clicks of rebound adjustment
22mm strut and shock shafts
Adjustable reservoir nitrogen pressure

ORDER MCS 3W products

MCS 4W

Our most focused damper with completely independent high speed and low speed circuits for both compression and rebound damping. The operating range is narrowed to allow for more definition across each sweep of adjustments.

18 clicks of high speed compression adjustment
10 clicks of low speed compression adjustment
18 clicks of high speed rebound adjustment
10 clicks of low speed rebound adjustment
Adjustable reservoir nitrogen pressure

MCS 4W - Special Order